refactor: 将Framework库和RT、UI放在同一个解决方案中。
This commit is contained in:
@@ -0,0 +1,213 @@
|
||||
using System.Collections.Generic;
|
||||
|
||||
namespace MECF.Framework.RT.EquipmentLibrary.HardwareUnits.LoadPorts.TDK
|
||||
{
|
||||
public enum CommandType
|
||||
{
|
||||
SET, // Initialization setting command
|
||||
MOD, // Operation mode setting command
|
||||
GET, // Status acquisition command
|
||||
FIN, // Normal reception command
|
||||
MOV, // Operation command
|
||||
EVT, // Start/Stop event report command
|
||||
RST, // Resend initialization setting command comman
|
||||
RFN, // Resend normal reception command
|
||||
RMV, // Resend operation command
|
||||
}
|
||||
|
||||
public enum RespType
|
||||
{
|
||||
NAK, // Initialization setting command
|
||||
ACK, // Operation mode setting command
|
||||
INF, // Status acquisition command
|
||||
ABS, // Normal reception command
|
||||
}
|
||||
|
||||
//顺序不能变!!!
|
||||
public enum Indicator
|
||||
{
|
||||
LOAD = 0x01,
|
||||
UNLOAD = 0x02,
|
||||
ACCESSMANUL = 0x03,
|
||||
PRESENCE = 0x04,
|
||||
PLACEMENT = 0x05,
|
||||
|
||||
ACCESSAUTO = 0x06,
|
||||
RESERVE1 = 0x07,
|
||||
ALARM = 0x08,
|
||||
RESERVE2 = 0x9,
|
||||
|
||||
CLAMP,
|
||||
DOCK,
|
||||
ACCESS_SW,
|
||||
}
|
||||
|
||||
//public enum IndicatorState
|
||||
//{
|
||||
// ON,
|
||||
// BLINK,
|
||||
// OFF,
|
||||
//}
|
||||
|
||||
public enum Mode
|
||||
{
|
||||
ONMGV, //Changes to the online mode
|
||||
MENTE,
|
||||
}
|
||||
|
||||
public enum QueryType
|
||||
{
|
||||
STATE, //Checks the status.
|
||||
VERSN, //Checks the version.
|
||||
LEDST, //Reports the indicator status.
|
||||
MAPDT, //Wafer search data (descending order)
|
||||
MAPRD, //Wafer search data (ascending order)
|
||||
WFCNT, //Wafer quantity check
|
||||
FSBxx //Checks whether the FOSB Mode is ON/OFF
|
||||
}
|
||||
|
||||
public enum EvtType
|
||||
{
|
||||
EVTON, //Starts reporting all events.(FOUP events is excluded)
|
||||
EVTOF, //Stops reporting all events. (FOUP events is excluded)
|
||||
FPEON, //Starts reporting FOUP events.
|
||||
FPEOF, //Stops reporting FOUP events.
|
||||
}
|
||||
|
||||
public enum MovType
|
||||
{
|
||||
ORGSH, //Moves the FOUP to the initial position.
|
||||
ABORG, //Aborts the operation and moves the FOUP to the initial position.
|
||||
CLOAD, //Loads the FOUP (transfers the FOUP to the process unit).
|
||||
CLDDK, //Loads the FOUP (same as CLOAD) to the point where the system is ready to open the door.
|
||||
CLDYD, //Clamps the FOUP and moves the FOUP to the Y-axis docking position.
|
||||
CLDOP, //Continues loading the FOUP after CLDDK.
|
||||
CLDMP, //Maps and loads the FOUP.
|
||||
CLMPO, //Continues mapping and loading the FOUP after CLDDK.
|
||||
CULOD, //Unloads the FOUP (at the ejection position).
|
||||
CULDK, //Closes the door (same as CULOD).
|
||||
CUDCL, //Undocks the FOUP (while being clamped) after CULDK.
|
||||
CUDNC, //Unloads the FOUP after CULDK.
|
||||
CULYD, //Unloads the FOUP to the docking status.
|
||||
CULFC, //Unloads the FOUP to the point where the system can release (unclamp) the FOUP.
|
||||
CUDMP, //Maps and unloads the FOUP from the loaded status.
|
||||
CUMDK, //Maps the FOUP and closes the door from the loaded status.
|
||||
CUMFC, //Maps the FOUP to the before-unclamp status from the loaded status.
|
||||
MAPDO, //Maps the FOUP while being loaded.
|
||||
REMAP, //Resumes the interrupted mapping.
|
||||
|
||||
PODOP, //FOUP clamp: Open
|
||||
PODCL, //FOUP clamp: Close
|
||||
VACON, //Vacuum on
|
||||
VACOF, //Vacuum off
|
||||
DOROP, //Latch key: Open (Unlatches the FOUP door.)
|
||||
DORCL, //Latch key: Close (Latches the FOUP door.)
|
||||
MAPOP, //Mapper arm: Open
|
||||
MAPCL, //Mapper arm: Close
|
||||
ZDRUP, //Move to Z-axis up position (door open position)
|
||||
ZDRDW, //Move to Z-axis down position (transport unit handover possible position)
|
||||
ZDRMP, //Lower to Z-axis mapping end position and conduct mapping
|
||||
ZMPST, //Move the mapper to the start position
|
||||
YWAIT, //Move to Y-axis undock position
|
||||
YDOOR, //Move to Y-axis dock position
|
||||
DORBK, //Move to door open position
|
||||
DORFW, //Move to door close position
|
||||
|
||||
|
||||
RETRY, //Retry during recoverable error
|
||||
STOP_, //Immediate stop and command abort
|
||||
PAUSE, //Immediate stop
|
||||
ABORT, //Command abort
|
||||
RESUM, //Resume operation
|
||||
}
|
||||
|
||||
public class ErrorCode
|
||||
{
|
||||
|
||||
private Dictionary<string, string> dict = new Dictionary<string, string>
|
||||
{
|
||||
{"02","Z-axis position: NG (Down)"},
|
||||
{"42","Z-axis position: NG (Up)"},
|
||||
{"04","Y-axis position: NG (Dock)"},
|
||||
{"44","Y-axis position: NG (Undock)"},
|
||||
{"07","Wafer protrusion"},
|
||||
{"47","Grass wafer protrusion (Option)"},
|
||||
{"08","Door forward/backward position: NG(Open)"},
|
||||
{"48","Door forward/backward position: NG(Close)"},
|
||||
{"F2","FOUP door close error."},
|
||||
{"09","Mapper arm position: NG (Open)"},
|
||||
{"49","Mapper arm position: NG (Close)"},
|
||||
|
||||
{"11","Mapper stopper position: NG (On)"},
|
||||
{"51","Mapper stopper position: NG (Off)"},
|
||||
{"12","Mapping end position: NG"},
|
||||
|
||||
{"61","FOUP clamp open error (Up)"},
|
||||
{"21","FOUP clamp open error (Back)"},
|
||||
{"62","FOUP clamp open error (Down)"},
|
||||
{"22","FOUP clamp close error (Front)"},
|
||||
{"63","FOUP clamp close error (Middle)"},
|
||||
{"23","Latch key open error"},
|
||||
{"24","Latch key close error"},
|
||||
|
||||
{"25","Vacuum on error"},
|
||||
{"26","Vacuum off error"},
|
||||
{"27","Main air error "},
|
||||
{"A1","Normal position error at FOUP open"},
|
||||
{"A2","Normal position error at FOUP close"},
|
||||
{"A3","Mapper storage error when Z-axis lowered"},
|
||||
{"A4","Parallel signal error from upper machine"},
|
||||
|
||||
{"FD","Interlock relay failure"},
|
||||
{"FE","Communication failure"},
|
||||
|
||||
{"FF","Obstacle detection sensor failure"},
|
||||
{"FC","Fan operation error"},
|
||||
|
||||
{"EE","Mapping mechanical(Adjustment) error"},
|
||||
{"EF","Mapping mechanical(Sensor) error"},
|
||||
|
||||
{"F1","Door detection error during dock"},
|
||||
{"31","Door detection error except dock"},
|
||||
};
|
||||
public ErrorCode()
|
||||
{
|
||||
}
|
||||
|
||||
public string Code2Msg(string code)
|
||||
{
|
||||
if (dict.ContainsKey(code))
|
||||
{
|
||||
return string.Format("Code:{0},Message:{1}", code, dict[code]);
|
||||
}
|
||||
return code;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
public enum LoadportCassetteState
|
||||
{
|
||||
None, //Load sensor/Position sensor: All OFF
|
||||
Normal, //Load sensor/Position sensor: All ON
|
||||
Absent, //Load sensor: ON, Position sensor: 1 or 2: ON
|
||||
Unknown,//Load sensor: ON, Position sensor: All OFF
|
||||
//or Load sensor: OFF, Except Position sensor: All OFF
|
||||
}
|
||||
|
||||
public enum FoupDoorState
|
||||
{
|
||||
Open,
|
||||
Close,
|
||||
Unknown,
|
||||
}
|
||||
public enum FoupClampState
|
||||
{
|
||||
Open,
|
||||
Close,
|
||||
Unknown,
|
||||
}
|
||||
*/
|
||||
|
||||
|
||||
}
|
||||
Reference in New Issue
Block a user